How To Transform Ordinary Glass Into A Rainbow Glass With Prismatic Window Film?

Rainbow Glass

Rainbow window films immediately transform dull glass surfaces into captivating rainbow surfaces. The film’s colors vary depending on the angle and light, making it dynamic and ever-changing.

How to make rainbow glass? It’s not too tricky that you think it is. You can easily add vibrant colors to any room by using rainbow window films.

By applying prismatic film to a window receiving direct sunlight, you will instantly bring splashes of vibrant red, green, blue, orange, indigo, violet, and everything in between to your walls, floors, and ceiling.

Read this short guide to transform ordinary glass into a rainbow glass with prismatic window film.

What Is Prismatic Window Film?

Prismatic window film provides natural light while concealing an undesirable or uninteresting view. Examples include salons with a street view, windows facing parking lots or industrial areas, or windows overlooking alleyways and other buildings.

You can maximize natural light with prismatic window film and turn otherwise dull windows into one of your best interior design features.

8 Simple Steps To Transform An Ordinary Glass into A Rainbow Glass With Prismatic Window Film


It is simple to create rainbow glass from existing glass. As with screen protectors for smartphones, you need to clean the glass first, then apply the film.

It is much easier to install the colorful window tint than a small fill product because it does not require electricity to operate. Take a look!

Things You Need:

First, I would like to discuss what things you need to transfer an ordinary glass into a rainbow glass with prismatic window film.

  • Water
  • Spray Bottle
  • Paper Towel
  • Dish Soap
  • Scissor
  • Pencil
  • Squeegee

Now, move on to the steps, and the number six step is essential.

Step 1

First, you need to make soapy water. In order to make soapy water, add one drop of dish soap. Then, put all the mixture into the spray bottle and shake well. Please, make sure that you don’t use more than two drops of dish soap.

Step 2

Select a window with direct sunlight so that you can take measurements. Please note that if the window does not receive direct sunlight, your film will not perform as well. So, make sure that your window is directed towards the sunlight.

Step 3

Spray the soapy water mixture on the window using a sponge, rag, or spray bottle. If the glass has streaks, wipe them off with paper towels. Repeat the process by lightly wetting the window once again with the solution.

Step 4

After that, attach the liner to the back of the window film. Outline the window film you wish to use on the back of the film. To fit your window, cut the film with a pair of household scissors.

Step 5

Peel the window with the film liner off slowly and start at a corner or an edge instead of peeling off the entire liner at once; this will ensure you get the best results.

Step 6

Use a squeegee to secure the window film to the glass after the first section is in place. Slightly squeeze bubbles out of the film as you work from top to bottom.

Step 7

You need to go over the surfaces of the window with a squeegee one more time to remove any remaining air bubbles after applying the film.

Step 8

Then, you need to use a dry cloth to wipe away excess water and check for any lingering air bubbles.


What kind of glass makes a rainbow?

Colorful glass ripples are made from silica (sand). Glass is made from silica combined with other materials to lower its melting temperature. A typical clear glass comprises silica, soda, lime, and sometimes lead. Ordinary glass is blown or rolled by hand.

Does rainbow window film work without direct sunlight?

Rainbow does not work without sunlight. When the rays are reflected on the window, it makes beautiful colors like a rainbow. Please note that you won’t get nearly the same results if your window doesn’t receive direct sunlight.

How does the rainbow come from in the wall?

As such, both the colors of the rainbow and the prism originate from light, which is sunlight in the case of the rainbow. The sun’s light is composed of white light, but the light contains the colors of the rainbow blended so that you can’t distinguish them.

What type of reflection takes place in a rainbow?

A rainbow is formed when drops of water are scattered by light and reflected (not completely internalized). You can analyze the rainbow color sequence by drawing the ray diagram of sunlight reflecting off of water drops.

Wind Up

If you want to transform ordinary smart glass into a rainbow glass with prismatic window film, follow the earlier mentioned steps. This process is more accessible and makes your room, office, garage window beautiful.

We hope you found this blog post How To Transform Ordinary Glass Into A Rainbow Glass With Prismatic Window Film? useful. Be sure to check out our post Low E-Glass And What It Can Do For Your Home for more great tips!

Low-E Glass And What It Can Do For Your Home

Have Experience in the Moving Industry? Want an Additional Income Stream? Work With All Around Moving!

Unique opportunity to earn extra income and apply your knowledge and expertise in the moving industry. Partner with us and we’ll help you make money. Click here to learn more.

Havenly - Stunning Interior Design Services